For the wall lamp, I believe that everyone will not feel strange. In many people's bedroom, there are such lamps. In general, the lights of these lamps are relatively soft, so it is very suitable for reading at night, but also emitting In a warm and romantic atmosphere, compared with the main lights for daily needs, the wall lights also have the need for the owner to read, change clothes, and dress the local lighting needs, but some people think that the bedroom already has a lot of lighting, The presence of the wall lamp is somewhat redundant. Let's talk about the bedroom lamp below. I hope to provide you with some help. Is it necessary to install the bedroom wall light? Replacing the main lamp of the indoor core with a wall lamp has a very good effect, coupled with a scattering lampshade with a low surface brightness, I believe that many people will be able to put on such a dress, especially on the wall above the headboard. The brown engraved glass wall lamp has ancient charm, elegance and profound charm. Therefore, it is necessary to install a wall lamp in the bedroom. Bedroom wall light installation precautions 1, bedside wall lamp installation location selection As we all know, this type of lamp has a wide range of use. Whether it is a hallway, a bathroom mirror, or a bedside, the utility is better, but the role of these three locations is not the same. In general, the corridor is mainly the role of lighting, light The intensity is not great, but the mirror is to help make-up and wash, on the bedside is our daily reading, the concentration of light. 2, bedside lamp should be higher than sitting and lying position Although the use of such lamps at the head of the bed increases the convenience of the weekdays, special attention should be paid to the height of the lamp. If it is too high, it will affect the brightness, the light will disperse, and it will not be able to gather. If it is low, it will hit the head of the person. Generally speaking, it is better to be between 1.5~1.7m from the ground, and the distance from the wall is 9.5~49cm. 3, choose the wall lamp to reserve the wire head Since this type of lamp is usually positioned above the head of the bed, if no electric wire is left on the wall before the room is dressed, it is recommended that wall lamps not be used as bedside lighting because the wall light is often installed in the middle of the wall. If there is no dark line, it is necessary to draw a wire on the wall according to the position of the wall lamp, so that the smooth wall surface becomes unsightly. 4, bedside lamp switch should reach out and touch No matter what kind of lamp is on the bedside, you must reach the switch button to reach out, otherwise when you are drowsy and you want to turn off the light, you need to find out the switch or adjust the brightness again. At this time, the pajamas may be tossed. There is not much left, so the switch of the bedside wall light should be set in a reachable area. Summary: The above is about the bedroom wall lamp is necessary to install the article introduced, I believe that most readers need to install the bedroom wall lamp you already have a better understanding, of course, if you have better suggestions and ideas, please feel free to consult the small series . Bedroom wall light Ptfe Sheet Vietnam,Ptfe Porous Sheet,Ptfe Sheet Plate,Ptfe Sheet Weight Cixi Congfeng Fluorine Plastic Co.,Ltd , https://www.cfptfeseal.com
