Aluminum Stub End has many advantages such as long service life, light weight, good heat resistance, good corrosion resistance, good heat preservation, high impact. According to the grad of the aluminum, it can be divided into Aluminum 1060 Stub End, Aluminum 5083 Stub End, Aluminum 6061 Stub End, Aluminum B241 Stub End.
Item Cold: aluminum stub end
Diameter: 1" 1.5" 2" 2.5" 3" 3.5" 4" 5" 6"
Wall thickness: 1.5mm,1.8mm,2.0mm,2.5mm
Surface treatment: Polish/Raw
Material: Aluminum 6061/ Aluminum 6063 /Aluminum 5083
MOQ: 50 pieces
Packing: Plastic bags and carton boxes
Aluminum Stub End Aluminum Stub End, Aluminum 1060 Stub End, Aluminum 5083 Stub End, Aluminum 6061 Stub End, Aluminum B241 Stub End HEBEI HANMAC MACHINE CO., LTD. , https://www.chinahanmac.com
1. Must know: LCD splicing large screen selection should be cautious about a complete large-screen splicing display system, LCD display unit is the most indispensable part, it is like the entire system of "face", good and bad can be seen at a glance Out of it. In splicing the selection of a large screen, the user can subjectively judge from aspects such as viewing angle, brightness, color reproduction degree, and patch size. At present, the mainstream LCD splicing screen has reached a viewing angle of 178 degrees horizontal and vertical. In terms of brightness, the products on the market are fully capable of meeting the needs of general monitoring, display, and other places. Therefore, users can choose their own colors, and colors will depend on Your sharp eyes decide.
2. Must know: Upstream LCD splicing panel makers said that the upstream LCD splicing panel makers, many netizens may have Ying asked, as ordinary users need to understand so much? The answer is certainly yes, because of the core technology of LCD splicing products Basically, they are in the hands of these panel makers. They not only control the lifeline of the market, but also lead the market. Therefore, paying attention to them means paying attention to the trend of the LCD splicing market.
From the current point of view, the mainstream upstream panel makers in the LCD splicing market include Samsung, Sharp and LG. Among them, Samsung is the first company to get involved in the LCD splicing market, and his product line is also the most complete; LG is the last of the three companies to launch LCD splicing products in the domestic market. The products of the three of them have certain differences in the size of the product, the splicing gap between the units, and the panel. The user can select the product according to their own needs.
3. Must know: LCD line product line distribution product line, the market basically uses Samsung's panel. Samsung panel makers also provide corresponding panels to the market while introducing spliced ​​products. Currently, LCD panel splicing products from mainstream manufacturers in the market are basically from the two. The Emperor Ai Di has been using Samsung LCD panels for many years, so the quality is guaranteed!
From the splicing gap, Samsung's 5.5mm 46-inch ultra-narrow LCD splicing and stitching 3.9mm 55-inch splicing unit, seams 6.5mm Sharp's 60-inch splicing unit, seam LG 3.9mm The 49-inch splicing unit and the 55-inch splicing unit with a seam of 3.5. Judging from current market conditions, Samsung's support camp is the largest, Samsung's splicing products are also more mainstream. Of course, this has a certain relationship with Samsung entering the market earlier. However, with Sharp and LG's marketing efforts getting more and more, the support of these two camps has also been more and more.
Shenzhen Dii Ai Di Electronics Co., Ltd. was established in 2009, is a professional supplier of commercial display solutions for LCD splicing. Over the years, we have been adhering to the concept of "professional, reliable, and customer first", and we have promoted professional, reliable products and the best industry solutions to various industries. The company has always been at the forefront of the industry, grasp the latest market trends, and constantly introduce the latest and best LCD splicing screen. 
A lot of backward LCD splicing screens SMEs and individuals fight due to their brand strength, but they have not been able to fight in the early days. They have scale, strength, brand reputation, technical service team, a large number of successful cases and customers, but also by their size and investment The limitation is that it cannot really serve the customers. The only way out is to fight prices, the sales price is close to the cost, there is no reasonable profit to support the liquid crystal splicing products, and the after-sales service provided by the LCD splicing screen becomes a piece of paper, so the company can't provide it. Services, not to mention quality of service; no product quality protection, LCD splicing product sales is basically a blind cat catching the mouse to get through.