Tiles, this kind of renovation of building materials, some people can use it for decades, but some people do not even use it for several years began to appear broken phenomenon, this has a lot to do with the quality of the tiles, but with the tiles in the There is also a great deal of connection between paving and maintenance. In order to avoid unnecessary troubles in the future, Xiaobian teaches everyone how to do a good job of protective work when laying tiles. Tile “Extend Life†Artifact 1: Use Corner Bars Benefits: Can protect the corners of the tiles, but also can cover the gaps The tile guard bar is a line that protects the corners of the tile (also called the angle of the horn). It is flaky on one side. It is inserted into the wall during construction. The tile-shaped side of the tile covers the corner of the tile. The color is gold. Yellow, rose gold, silver gray, stainless steel mirror color, etc. The material is generally plastic, aluminum alloy, stainless steel, PVC several. The tiling angle of traditional tiling is generally right-angled. Families with children can buy thick tiles with inverted corner protection strips to solve potential safety hazards. For materials, it is recommended to use stainless steel corner protection strips. The aluminum alloy corner protection strips are made of soft materials. When they collide or squeeze during construction, they will sag and deform. In addition to protecting the corners of the tiles, the corner bead can also beautify and conceal the tiles. For example, some tiles have irregular cross-sections, and the sun-corner seams are difficult to perfectly seam and the corner protection strips can be concealed. Tile “Yan Shou†Artifact II: Sealant Benefits: High dirt resistance, enhanced bathroom mildew Floor tile is generally not easy to mold and dirt, most of the tiles are dirty because of the gap between the tiles mold or off the dust, the traditional use of ceramic tile construction cement, mulberry instead of sealant or even caulking agent, in fact, as long as the construction of the tile When using a good sealant can prevent this problem. The most appropriate time for the use of the sealant is 48 hours after the tiles are attached. Before the construction, the grit of the brick seams should be removed. The construction environment should be kept ventilated and dehumidified. The materials used during the construction should be mixed evenly and the pigment should be pressed in the same way as the soil. Fill in the gap and clear the rest of the brick surface. The caulking agent can also be used to fill the gap that has been peeled off, but the color may be slightly uneven. The quality of the sealant is very important for the use effect. At present, there are four types of sealant in the market: cement, silica gel, cement, latex, and epoxy resin. Most of the sealant must be added with latex to improve the wear resistance and viscosity. And elasticity. Tile "Yan Shou" Artifact III: Waxing Benefits: Improves water and stain resistance, maintains brightness, and extends service life Do not think that only the floor only need to wax, in fact, tile waxing is also a good way to protect the material! After paving the tiles, playing a layer of wax can improve its waterproof, anti-fouling, if not bother, polishing and waxing can be every 2 - Once in 3 months, just four times a year can make the home tiles last longer and longer life. When waxing the floor tile, pay attention to the clean tile surface and then to the wax surface treatment. Apply the wax evenly to the floor tile. Generally do not trample the surface within 8 hours after waxing and wait for air drying. If there is a small breakage in the edge or in the middle of the tile, the small drop can be affixed with white latex. If it is re-waxed, it needs to be treated with wax. After about 15 minutes of even pouring of wax, wait for the wax to infiltrate into the tiles, then use the water to moisten the tiles, and finally re-wax, the tiles will be bling bling! Tile "Yan Shou" artifact IV: anti-oil stickers Benefits: Oil lazy good helper, convenient cleaning The kitchen is the main source of fumes in the home. Tiles inside are most likely to be soiled and difficult to clean. Kitchen tiles that have been used for a long time will fade and look unpleasant. Before applying a grease-proof sticker to the kitchen tiles, this trouble can be easily eliminated. solved. After plastering the tiles, it is best to paste anti-oil stickers on cooking areas such as stoves and range hoods, and on tiles that may be contaminated with oil. This is because it is most likely to splash oil, accumulate grease, and damage tile quality. Stickers should pay attention to the style of space decoration and color matching, when cleaning with a dish cloth, wipe the detergent, and the same as cleaning dishes can be washed (not steel ball, high hardness cleaning cloth) ,Very convenient. Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia). Tile tile paving tiles maintenance decoration construction knowledge Furnace Head Graphite Block,Furnace Conductive Electrode,Good Furnace Head Graphite Block,Good Conductive Cathode Carbon Block Taigu Tengfei Carbon Co., Ltd. , https://www.tftsgs.com
